Decortive Well Head Cover
FREE SHIPPING
Decorative Well Head Cover · Hand-Finished Fiberglass · 5 Sizes
The well head has to stay above grade, vented, and reachable — which rules out burying it or sealing it inside a box. This decorative well head cover sets over the casing, sanitary cap, and wiring as a hand-finished fiberglass formation with a natural stone texture. The cap keeps its clearance, a technician lifts the shell off by hand, and the yard stops looking like a utility site. Five sizes.
- Sets over the cap, never seals it
- Never needs painting
- Made in the USA · free shipping
Decorative Well Head Cover
Hide the Well Head Without Interfering With It
A well head is the one part of the system that cannot be buried, sealed, or relocated — the casing has to finish above grade, the sanitary cap has to stay clear, and a technician has to reach it. This cover works with those constraints rather than around them: a hand-finished fiberglass formation that sets over the assembly and lifts off by hand. Five sizes.
Before You Cover It
What the Well Head Still Needs
Most bad well head concealment attempts fail for the same reason: they treat the well head as something to bury.
It isn't. The casing has to terminate above finished grade, the sanitary cap has to stay clear and uncompromised, and wiring and conduit entries need to stay inspectable. Mounding soil over the head, boxing it in permanently, or sealing the cap creates a contamination path and a service problem at the same time. A decorative cover avoids all of that by sitting over the assembly without touching it, resting on grade and lifting off whenever someone needs in. Nothing is fastened to the casing and nothing contacts the cap.
What It Does
Concealment, Protection, and Full Access
Reads as landscape
The stone profile sits in beds and turf as a boulder, which clears HOA and commercial aesthetic requirements a plain enclosure won't.
Keeps traffic off the cap
Shields the cap, casing, and conduit from mowers, trimmers, and impact — the damage that compromises a sanitary seal.
Nothing to dismantle
No fasteners on a routine install. Pulling a pump or servicing the cap means lifting the shell aside, not removing hardware.
Sizing the Head
Measure to the Top of the Cap
A well head on its own is a small target, so the two cut-style sizes usually fit. Measure from finished grade to the highest point — normally the cap or a conduit fitting above it — and across the widest part of the assembly, then add clearance so the shell never rests on the cap.
- 16″ × 16″ × 25″ for a standard head and sanitary cap
- 19″ × 19″ × 32″ where the casing stands taller or carries conduit
- Step up to a formation if a tank or pump shares the pad
Construction
Hand-Laid Fiberglass, Color Molded In
The shell is hand-laid fiberglass laminate with an irregular profile and a tonal pigmented gelcoat — varied the way quarried stone is rather than one flat color. The pigment is part of the laminate, not paint applied over it, so there is no coating to chalk or peel and nothing to repaint.
- Hand-laid fiberglass laminate shell
- UV-stabilized gelcoat integral to the shell
- Made in the USA — Mount Ulla, North Carolina
Size Guide
Five Sizes — 16″ to 69″
| Size | Dimensions (L × W × H) | Best for |
|---|---|---|
| Extra Small · Cut-Style | 16″ × 16″ × 25″ | Standard well head and sanitary cap |
| Small · Cut-Style | 19″ × 19″ × 32″ | Taller casing, conduit, or a small backflow |
| Medium | 38″ × 37″ × 37″ | Well head with a pressure tank or mid-size grouping |
| Medium-Large | 57″ × 66″ × 41″ | Wider well-head-and-tank or multi-component grouping |
| Large | 69″ × 39″ × 40″ | Long well head, tank, and pump run or clustered equipment |
Measure from finished grade to the highest point on the assembly — usually the cap or a conduit fitting — and add clearance so nothing rests on the cap.
Specifications
Construction — All Sizes
| Material | Hand-laid fiberglass laminate |
| Finish | Tonal pigmented gelcoat with natural stone texture |
| Covers | Casing, sanitary cap, conduit, and connected lines |
| Installation | Sets over the assembly on grade — nothing attaches to the casing |
| Durability | UV-stabilized — resists chalking and fading |
| Service | Lifts off by hand; anchor kit available for exposed installs |
| Origin | Made in the USA — Mount Ulla, North Carolina |
| Shipping | Free shipping to all 50 states |
Gallery
A Closer Look
FAQ
Common Questions
Is it safe to cover a well head?
What size do I need for just the well head?
Can a technician still pull the pump?
Does it protect the well head from freezing?
Will the finish fade or need painting?
Compare the full Piedmont line — decorative rock covers & insulated fiberglass well covers.
Browse all well covers